Market Prices
WTI Oil $85.72 −2.84 Natural Gas $3.12 −0.11 Brent Oil $92.44 −3.40
Settlement Nov 16, 2026
LMJ Land Services

Depth Descriptions: Measured, True Vertical, Subsea or Stratigraphic?

Two assignments both say 10,000 feet and can mean two different places in the ground. The four ways depth is written in leases and assignments, and how I record a depth so the reference never gets lost.

LMJ Chalk Talk Ep 59 · 1:51 · Watch on YouTube

Two assignments both say 10,000 feet and can mean two different places in the ground. The four ways depth is written in leases and assignments, and how I record a depth so the reference never gets lost.

Your chain of title, untangled. Call LMJ Land Services: 432-247-7172 | lmjlandservices.com. Title abstracts, runsheets, ownership reports, curative and acquisition due diligence in New Mexico, Texas and nationwide.

LMJ Chalk Talk, Episode 59. Landman math and title, one lesson at a time.

Chapters:

Free printable guide for this episode: https://lmjlandservices.com/free-guides/

Michele Johnson | LMJ Land Services

Title, ownership and due diligence for oil and gas

Full title work in Texas, New Mexico, West Virginia and nationwide: runsheets, ownership reports, lease schedules, division order and curative support.

432-247-7172 | michele@lmjlandservices.com

https://lmjlandservices.com

General education only, not legal, tax or financial advice. I'm not an attorney; talk to a licensed attorney in your state about your situation.

Chapters

Free printable guide for this video
Download it on the free guides page. Title work on a tract like this one: Michele Johnson, 432-247-7172, michele@lmjlandservices.com.

Transcript

Welcome back to LMJ Chalk Talk. I'm Michele Johnson. Today: depth descriptions. Two assignments both say 10,000 feet, and they can mean two different places in the ground. Here are the four ways I see depth written.

One: measured depth. The length of the wellbore, along the hole. In a horizontal well, measured depth can be twice the vertical depth, so it's rarely the right measure for a depth cut unless the instrument says so. Two: true vertical depth. Straight down from the surface.

That's what most people mean by a depth. Three: subsea. Measured from sea level, not from the surface. If the surface elevation is 3,000 feet, 10,000 feet subsea is about 13,000 feet below the surface. Same number, 3,000 feet apart.

Four: stratigraphic. Down to the base of a named formation, as seen in the log of a named well. That ties the depth to the rock, so it follows the formation as it rises and dips across the lease. When I read a depth, I write it down exactly as the instrument says it, with the reference: surface, subsea, or the formation and the log well. And if the instrument doesn't say, I don't guess.

I flag it, because an assignment of depths above 10,000 feet with no reference is a question for the attorney. Trap of the day: copying the number and dropping the reference. 10,000 feet subsea and 10,000 feet below the surface are not the same depth. I'm Michele Johnson with LMJ Land Services. For depth severance and leasehold title, call 432-247-7172.

Related on LMJ Land Services

All LMJ videos

Public data on this page comes from government agencies (Railroad Commission of Texas, New Mexico Oil Conservation Division, Bureau of Land Management, U.S. Energy Information Administration), Baker Hughes and company releases, as named where each figure is shown. LMJ Land Services is not affiliated with any agency or company named on this site.

AI disclosure: This page was compiled with help from B27 Intelligence, the AI-assisted research system of LMJ Land Services, and reviewed by Michele Johnson. Automated systems can make mistakes; confirm any record, link or figure at its official source before relying on it.

Let’s Talk About Your Project

Accurate research. Clear answers. Defensible results.

Contact LMJ